Transient Linear Elasticity (2D)

This tutorial demonstrates the transient analysis of a two-dimensional linear elastic solid. In contrast to static analysis, the inertia of the structure is taken into account, allowing the simulation of time-dependent phenomena such as vibrations, wave propagation, and dynamic loading.

The example introduces the complete workflow, including mesh generation, material definition, boundary conditions, time-dependent loading, time integration, and post-processing of displacement and stress fields.

Example

linelast2D_transient.ipynb

Choosing the time increment

CDM must respect the largest frequency of the constrained/reduced system; lagged damping can tighten that limit. Standard HHT is unconditionally stable for the usual linear positive-mass system, but both methods still need enough time samples to resolve the desired response and prescribed motion.

Use the time-step guide for the formulas and a largestEigenValue example. Then halve Δt, rebuild sampled histories and n for the same final time, and compare displacements, velocities and stress peaks. The method and option tables cover damping, iterative solves, MPCs and nonlinear operator updates.